CAD/BIM CATALOG

CAD (0)
  • Cart is empty
Streamline® XHP Copper-Iron Fittings for use in refrigeration applications. Available sizes ranging from 3/8” to 2-1/8” for continuous 130 BAR / 1885 PSI pressure ratings at 120°C / 250°F.
Unit of Measure

Weight

N/A 0.87 lb
Material1 N/A COPPER-IRON

Operating Temperature [Max]

N/A 250 ºF

Operating Pressure [Max]

N/A 1885 psi

End Type

N/A Cup (Braze)

End Size

N/A 1 5/8 in

Second End Type

N/A Cup (Braze)

Second End Size

N/A 3/4 in

Third End Type

N/A Cup (Braze)

Third End Size

N/A 1 5/8 in

Standards

N/A
  • Copper-iron (CuFe2P)
  • UNS C19400
  • 130 BAR / 1,885 PSI
  • 120°C / 250°F
  • Overall Length

    N/A 4.13 in

    Overall Height

    N/A 2.80 in

    Overall Width

    N/A 1.86 in

    X

    N/A 0.98 in

    X1

    N/A 1.73 in

    Y

    N/A 0.98 in

    Key Specifications

    N/A Streamline® XHP Copper Fittings is third party verified through Underwriters Laboratories for max operating temperature of 250° F (120° C) and continuous operating pressure of 1740 psi (120 Bar).

    Installation

    N/A
    Streamline® XHP copper material was developed for use with high pressure refrigerants. Compared to conventional pure copper Cu-DHP (99.9% Cu; UNS C12200), Streamline® XHP material is a CuFe2P alloy (2% iron; UNS C19400). This material’s wettability is comparable to that of Cu-DHP. Streamline® XHPTM is not subject to any restrictions for the selection of brazing alloy. Commonly used brazing filler metal types such as BCup Alloy (may contain 0%-30% Silver – Ag) or Bag Alloy (may contain anywhere between 24% and 93% Silver – Ag) can be used. The brazing alloy chosen must be clarified with the brazing alloy supplier for each specific application. The selection of brazing alloy may depend on a few factors: applicable codes, OEM specifications, vibration, and operating temperatures.
    • 1 Streamline® XHPTM Copper Fittings shall be made from material in compliance with UNS C19400 grade of copper.