Weight |
N/A 0.38 lb |
| Material1 | N/A COPPER-IRON |
Operating Temperature [Max] |
N/A 120 ºC250 ºF |
Operating Pressure [Max] |
N/A 130 bar1885 psi |
End Type |
N/A Fitting |
End Size |
N/A 1 5/8 in |
Second End Type |
N/A Cup (Braze) |
Second End Size |
N/A 1 3/8 in |
Standards |
N/A
|
Overall Length |
N/A 2.13 in |
Overall Height |
N/A 1.63 in |
Overall Width |
N/A 1.63 in |
X |
N/A 0.39 in |
Qty Pcs / Bag |
N/A 5 |
Master Qty Pcs / Box |
N/A 180 |
Mueller Description |
N/A 5/8OD FTG X 15MM FTG RED |
Key Specifications |
N/A Streamline® XHP Copper Fittings is third party verified through Underwriters Laboratories for max operating temperature of 250° F (120° C) and continuous operating pressure of 1740 psi (120 Bar). |
Installation |
N/A
Streamline® XHP copper material was developed for use with high pressure refrigerants. Compared to conventional pure copper Cu-DHP (99.9% Cu; UNS C12200), Streamline® XHP material is a CuFe2P alloy (2% iron; UNS C19400). This material’s wettability is comparable to that of Cu-DHP. Streamline® XHPTM is not subject to any restrictions for the selection of brazing alloy. Commonly used brazing filler metal types such as BCup Alloy (may contain 0%-30% Silver – Ag) or Bag Alloy (may contain anywhere between 24% and 93% Silver – Ag) can be used. The brazing alloy chosen must be clarified with the brazing alloy supplier for each specific application. The selection of brazing alloy may depend on a few factors: applicable codes, OEM specifications, vibration, and operating temperatures. |
