CAD/BIM CATALOG
Plugs & Connectors
plugs-connectors
Recommended Design Pressure (DP/ Maximum abnormal pressure
(MAP): 700 psig, 48 bar
In conformance with Refrigeration Fitting Standards SAE J513, Military
Standards MS-35867 through MS-35873 inclusive, MS-35919, MS-24815
and MS-16993
Fabricated from brass forgings or drawn brass rod eliminating the
possibility of seepage by porosity
Accurately machined and fully protected against damage during
shipping, handling and storage to assure tight leak-proof joints
Smooth interior finish provides unrestricted flow and reduced pressure
drop
/Asset/45--Flare-Fittings---Brass-Pipe-Plug-Dimensions.JPG
Recommended Design Pressure (DP/ Maximum abnormal pressure
(MAP): 700 psig, 48 bar
In conformance with Refrigeration Fitting Standards SAE J513, Military
Standards MS-35867 through MS-35873 inclusive, MS-35919, MS-24815
and MS-16993
Fabricated from brass forgings or drawn brass rod eliminating the
possibility of seepage by porosity
Accurately machined and fully protected against damage during
shipping, handling and storage to assure tight leak-proof joints
Smooth interior finish provides unrestricted flow and reduced pressure
drop
/Asset/45--Flare-Fittings---Connectors---Union_-Flare-to-Flare-Dimensions.JPG
Recommended Design Pressure (DP/ Maximum abnormal pressure
(MAP): 700 psig, 48 bar
In conformance with Refrigeration Fitting Standards SAE J513, Military
Standards MS-35867 through MS-35873 inclusive, MS-35919, MS-24815
and MS-16993
Fabricated from brass forgings or drawn brass rod eliminating the
possibility of seepage by porosity
Accurately machined and fully protected against damage during
shipping, handling and storage to assure tight leak-proof joints
Smooth interior finish provides unrestricted flow and reduced pressure
drop
/Asset/45--Flare-Fittings---Flare-Plug---Dimensions.JPG
Recommended Design Pressure (DP/ Maximum abnormal pressure
(MAP): 700 psig, 48 bar
In conformance with Refrigeration Fitting Standards SAE J513, Military
Standards MS-35867 through MS-35873 inclusive, MS-35919, MS-24815
and MS-16993
Fabricated from brass forgings or drawn brass rod eliminating the
possibility of seepage by porosity
Accurately machined and fully protected against damage during
shipping, handling and storage to assure tight leak-proof joints
Smooth interior finish provides unrestricted flow and reduced pressure
drop
/Asset/45--Flare-Fittings---Connectors---Half-Union-_-Flare-to-NPTFI-Dimensions.JPG
Recommended Design Pressure (DP/ Maximum abnormal pressure
(MAP): 700 psig, 48 bar
In conformance with Refrigeration Fitting Standards SAE J513, Military
Standards MS-35867 through MS-35873 inclusive, MS-35919, MS-24815
and MS-16993
Fabricated from brass forgings or drawn brass rod eliminating the
possibility of seepage by porosity
Accurately machined and fully protected against damage during
shipping, handling and storage to assure tight leak-proof joints
Smooth interior finish provides unrestricted flow and reduced pressure
drop
/Asset/45--Flare-Fittings---Connectors---Internal-Flare-Union-Dimensions.JPG
Recommended Design Pressure (DP/ Maximum abnormal pressure
(MAP): 700 psig, 48 bar
In conformance with Refrigeration Fitting Standards SAE J513, Military
Standards MS-35867 through MS-35873 inclusive, MS-35919, MS-24815
and MS-16993
Fabricated from brass forgings or drawn brass rod eliminating the
possibility of seepage by porosity
Accurately machined and fully protected against damage during
shipping, handling and storage to assure tight leak-proof joints
Smooth interior finish provides unrestricted flow and reduced pressure
drop
/Asset/45--Flare-Fittings---Connectors---Reducing-Unions-_-Fl-to-Fl-Dimensions.JPG
Recommended Design Pressure (DP/ Maximum abnormal pressure
(MAP): 700 psig, 48 bar
In conformance with Refrigeration Fitting Standards SAE J513, Military
Standards MS-35867 through MS-35873 inclusive, MS-35919, MS-24815
and MS-16993
Fabricated from brass forgings or drawn brass rod eliminating the
possibility of seepage by porosity
Accurately machined and fully protected against damage during
shipping, handling and storage to assure tight leak-proof joints
Smooth interior finish provides unrestricted flow and reduced pressure
drop
/Asset/45--Flare-Fittings---Connectors---Half-Union-_-Flare-to-NPTFI-Dimensions.JPG
Recommended Design Pressure (DP/ Maximum abnormal pressure
(MAP): 700 psig, 48 bar
In conformance with Refrigeration Fitting Standards SAE J513, Military
Standards MS-35867 through MS-35873 inclusive, MS-35919, MS-24815
and MS-16993
Fabricated from brass forgings or drawn brass rod eliminating the
possibility of seepage by porosity
Accurately machined and fully protected against damage during
shipping, handling and storage to assure tight leak-proof joints
Smooth interior finish provides unrestricted flow and reduced pressure
drop
/Asset/45--Flare-Fittings---Connectors---Half-Union-_-Ext-Fl-to-Solder-Dimensions.JPG
Recommended Design Pressure (DP/ Maximum abnormal pressure
(MAP): 700 psig, 48 bar
In conformance with Refrigeration Fitting Standards SAE J513, Military
Standards MS-35867 through MS-35873 inclusive, MS-35919, MS-24815
and MS-16993
Fabricated from brass forgings or drawn brass rod eliminating the
possibility of seepage by porosity
Accurately machined and fully protected against damage during
shipping, handling and storage to assure tight leak-proof joints
Smooth interior finish provides unrestricted flow and reduced pressure
drop
/Asset/45--Flare-Fittings---Connectors---Internal-Fl-Swivel-Unions-Dimensions.JPG
Recommended Design Pressure (DP/ Maximum abnormal pressure
(MAP): 700 psig, 48 bar
In conformance with Refrigeration Fitting Standards SAE J513, Military
Standards MS-35867 through MS-35873 inclusive, MS-35919, MS-24815
and MS-16993
Fabricated from brass forgings or drawn brass rod eliminating the
possibility of seepage by porosity
Accurately machined and fully protected against damage during
shipping, handling and storage to assure tight leak-proof joints
Smooth interior finish provides unrestricted flow and reduced pressure
drop
/Asset/45--Flare-Fittings---Connectors---Internal-Fl-to-Extension-Solder-Dimensions.JPG
Recommended Design Pressure (DP/ Maximum abnormal pressure
(MAP): 700 psig, 48 bar
In conformance with Refrigeration Fitting Standards SAE J513, Military
Standards MS-35867 through MS-35873 inclusive, MS-35919, MS-24815
and MS-16993
Fabricated from brass forgings or drawn brass rod eliminating the
possibility of seepage by porosity
Accurately machined and fully protected against damage during
shipping, handling and storage to assure tight leak-proof joints
Smooth interior finish provides unrestricted flow and reduced pressure
drop
/Asset/45--Flare-Fittings---Connectors---Half-Union-_-Flare-to-NPTFE.JPG
45° Flare Fittings - Brass Pipe Plug
(5) Features: 45° Flare Fittings - Connectors - Union‐ Flare to Flare
(6) Features: 45° Flare Fittings - Flare Plug
(7) Features: 45° Flare Fittings - Connectors - Half Union ‐ Flare to NPTFI
(13) Features: 45° Flare Fittings - Connectors - Internal Flare Union
(3) Features: 45° Flare Fittings - Connectors - Reducing Unions ‐ Fl to Fl
(9) Features: 45° Flare Fittings - Connectors - Internal Fl to External Fl
(11) Features: 45° Flare Fittings - Connectors - Half Union ‐ Ext Fl to Solder
(17) Features: 45° Flare Fittings - Connectors - Internal Fl Swivel Unions
(8) Features: 45° Flare Fittings - Connectors - Internal Fl to Extension Solder
(10) Features: 45° Flare Fittings - Connectors - Half Union ‐ Flare to NPTFE
(23) Features: Fusible Pipe Plugs & Connectors - Fusible Pipe Plugs ‐ NPTFE
(9) /Asset/Fusible-Pipe-Plugs---Connectors---Fusible-Pipe-Plugs-_-NPTFE-Dimensions.JPG 